600v-35kv Power >> Medium Voltage Power

 XLP/PVC CTS 1 Conductor

TYPE MV-90 POWER CABLE - 15kV, XLP Insulation, PVC Jacket, Copper Tape Shielded, 1 Conductor, 90°C Wet or Dry Locations

This Type MV-90 power cable is a single conductor, stranded bare copper with cross-linked polyethylene (XLP) insulation and ethylene-propylene rubber (EPR) and polyvinyl chloride (PVC) jacket. The conductor is surrounded by an extruded semi-conducting insulation shield with bare copper tape shield cabled with a ground wire and fillers. The cables are suitable for use in wet or dry locations at maximum operating temperature of 90°C for normal operation.

  • For installation in trough,conduit, ducts, aerial and direct buried as allowed by the NEC
  • Copper tape shielded
  • Sunlight and moisture resistant
  • Maximum continuous conductor temperature: 90°C DRY, 90°C WET

  • XLP/PVC CTS 1 Conductor
    Application: Main feeder, distribution and branch circuits in industrial, commercial and electric utility installations

    Specifications listed are from multiple manufacturers. The items above represent only a portion of the products available. For specific manufacturer technical information or for an item not shown, please contact a Calvert Wire cabling specialist at 800-837-2668.