Transportation >> Marine


 Type VFD Power Cable


VARIBLE FREQUENCY DRIVE (VFD) POWER CABLE - 2000 Volt, Gexolr Insulation, PVC Jacket, Three Conductor, Stranded Copper, 110°C Dry, Wet

VFD power cables are shielded, flexible motor supply cable for variable speed drives subject to non-linear power distortions. This cable is used to interconnect an AC variable frequency drive or control system, to an AC variable frequency motor. Variable Frequency AC motor drive output cables are subject to a harsh operating environment characterized by high voltage spikes, high noise levels and adverse environmental conditions. VFD cables were designed to overcome the shortcomings of unshielded tray cables, single conductor lead wire installed in conduit or continuously welded armored cable typically used in this application. This cable is constructed with Gexolr insulation and an UV and oil resistant polyvinyl chloride (PVC) jacket.

  • For installation in trays, raceways, troughs, channels, ducts, conduit, and by direct burial
  • Highly flexible tinned copper conductors with high strand counts
  • Easy to install and able to withstand tight minimum bending radii even during heavy vibration
  • Disperses voltage spikes, harmonics, and power distortions associated with variable frequency drives
  • Inner jacket is used to protect the insulation from the braid shield and to lower the capacitive interaction between the shield and power conductors
  • UV and oil resistant; Heat and moisture resistant
  • Maximum continuous conductor temperature: 110°C DRY, 110°C WET

  • Type VFD Power Cable
    Application: AC variable frequency drive or control system, to an AC variable frequency motor
    PrintRequest


    Specifications listed are from multiple manufacturers. The items above represent only a portion of the products available. For specific manufacturer technical information or for an item not shown, please contact a Calvert Wire cabling specialist at 800-837-2668.