Control & Instrumentation >> Tray Cable


 VNTC

TYPE TC VNTC CONTROL CABLE - 600 Volt, PVC/Nylon Insulation, PVC Jacket, Stranded Multi Conductor, 90°C Dry, 75°C Wet

VNTC Tray Cables are installed in cable trays, ducts and conduit and used in direct burial are extensively used in manufacturing facilities. Tray Cable is flexible, space efficient and are suitable for installation in wet or dry locations. The jackets are sunlight-resistant, impervious to moisture and vapor penetration.

  • For installation in raceways, trays, wireways, troughs, channels, ducts & conduit; direct burial
  • For installation indoors or outdoors, in wet or dry locations
  • Sunlight resistant polyvinyl chloride (PVC) jacket
  • Applicable for control, power, telemetering, relay, lighting or traffic control
  • Passes IEEE-383 vertical cable tray flame test
  • Maximum continuous conductor temperature: 90°C DRY, 75°C WET

  • PrintRequest

    VNTC

    Cable Tray Rated
    Application: Control, power, telemetering, relay, lighting or traffic control
     FREP/CPE

    TYPE TC FR-EP CONTROL CABLE - 600 Volt, FR-EP Insulation, CPE Jacket, Stranded Multi Conductor, 90°C Dry, 75°C Wet

    FR-EP Tray Cables are installed in cable trays, ducts and conduit and used in direct burial are extensively used in manufacturing facilities. Tray Cable is flexible, space efficient and are suitable for installation in wet or dry locations. The jackets are sunlight-resistant, impervious to moisture and vapor penetration. The cable is for applications where high performance reliability is essential and where environmental factors require cable characteristics including flameretardance,resistance to moisture,chemicals, thermal stability and physical durability.

  • For installation in raceways, trays, wireways, troughs, channels, ducts & conduit; direct burial
  • For installation indoors or outdoors, in wet or dry locations
  • Sunlight resistant, flame retardant chlorinated polyethylene (CPE) jacket
  • Excellent resistance to crush, compression cuts, and heat deformation
  • Low coefficient of friction for easy pulling
  • Flame retardant ethylene-propylene rubber (FR-EPR) insulation
  • Passes UL's VW-1 flame test
  • Maximum continuous conductor temperature: 90°C DRY, 75°C WET

  • PrintRequest

    FREP/CPE

    Cable Tray Rated
    Application: Remote control and signaling circuits in process industries such as petrochemical, steel, pulp and paper, cement, mining and cogeneration
     XLPO

    TYPE TC XLPO CONTROL CABLE - 600 Volt, XLPO Insulation, XLPO Jacket, Stranded Multi Conductor, 90°C Dry or Wet

    Type TC XLPO Control Cables are small diameter, thermoset cables at least 20% smaller in diameter than standard control cable. The cable may be installed in wet and dry locations, indoors and outdoors, in metal trays, conduits, ducts, or in direct burial applications. It is ideal for applications in substations, cogeneration, waste/energy, petrochemical and industrial facilities to perform a variety of control and related functions.

  • For installation in trays, ducts & conduit; direct burial
  • For use indoors or outdoors, in wet or dry locations
  • Thermoset insulation and jacket for enhanced thermal stability
  • Small diameter & light weight
  • Low friction jacket allows for easy pulls
  • Reduced wall, flame retardant, sunlight resistant, low smoke, zero-halogen black cross-linked polyolefin (XLPO) jacket
  • Flame retardant cross-linked polyolefin (XLPO) insulation
  • Passes UL's VW-1 flame test
  • Maximum continuous conductor temperature: 90°C DRY, 90°C WET

  • PrintRequest

    XLPO

    Cable Tray Rated
    Application: Substations, cogeneration and other industrial facilities for control applications
     XLP/PVC

    TYPE TC XLP/PVC CONTROL CABLE - 600 Volt, XLPO Insulation, PVC Jacket, Stranded Multi Conductor, 90°C Dry, 75°C Wet

    Type TC XLP Control Cable is a superior flame-retardant cable for use in power, control and lighting circuits in a broad range of commercial, industrial and Signal and traffic control applications. Approved for use in dry locations at 90°C, for installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts. The cable can be used in NEC Class 1 and 2, Division 2 hazardous locations.

  • For installation in in free air, trays, raceways or direct burial
  • For use indoors or outdoors, in wet or dry locations
  • Sunlight resistant polyvinyl chloride (PVC) jacket
  • Cross linked polyethylene (XLP) insulation
  • Circuit identification color coded
  • Passes IEEE-383 vertical cable tray flame test
  • Maximum continuous conductor temperature: 90°C DRY, 75°C WET

  • PrintRequest

    XLP/PVC

    Cable Tray Rated
    Application: Power and lighting circuits in commercial and industrial applications
     XLPO/HYP

    TYPE TC XLPO/HYP CONTROL CABLE - 600 Volt, XLPO Insulation, CSPE Jacket, Stranded Multi Conductor, 90°C Dry or Wet

    Type TC XLPO/HYP Control Cables are small diameter, thermoset cables at least 20% smaller in diameter than standard control cable. The cable may be installed in wet and dry locations, indoors and outdoors, in metal trays, conduits, ducts, or in direct burial applications. It is ideal for applications in substations, cogeneration, waste/energy, petrochemical and industrial facilities to perform a variety of control and related functions. For applications where high performance reliability is essential and where environmental factors require cable characteristics including flame retardance, resistance to moisture, chemicals and physical durability.

  • For installation in in free air, trays, raceways or direct burial
  • For use indoors or outdoors, in wet or dry locations
  • Thermoset insulation and jacket for enhanced thermal stability
  • Small diameter & light weight
  • Low friction jacket allows for easy pulls
  • Hypalonr chlorosulphonated polyethylene (CSPE) jacket
  • Flame retardant cross-linked polyolefin (XLPO) insulation
  • Passes UL's VW-1 flame test
  • Maximum continuous conductor temperature: 90°C DRY, 90°C WET

  • PrintRequest

    XLPO/HYP

    Cable Tray Rated
    Application: Substations, cogeneration and other industrial facilities for control applications
     TFN

    TYPE TC TFN CONTROL CABLE - 600 Volt, TFN Insulation, PVC Jacket, Stranded Multi Conductor, 90°C Dry, 75°C Wet

    Type TC TFN Control Cable is a general purpose cable for use in power, control and lighting circuits in a range of commerical and industrial applications. Approved for continuous operation at 90°C in dry locations, installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts. May be used in NEC Class I and II, Division 2 hazardous locations. Approved for Class 1 remote-control and signaling circuits per Article 725 of the NEC.

  • For installation in in free air, trays, raceways or direct burial
  • For use indoors or outdoors, in wet or dry locations
  • Sunlight resistant polyvinyl chloride (PVC) jacket
  • Nylon conductor jacket is heat and light stabilized
  • Low moisture absorption characteristics
  • Circuit identification color coded
  • Passes IEEE-383 vertical cable tray flame test
  • Maximum continuous conductor temperature: 90°C DRY, 75°C WET

  • PrintRequest

    TFN

    Cable Tray Rated
    Application: Power, control and lighting circuits in commerical and industrial applications


    Specifications listed are from multiple manufacturers. The items above represent only a portion of the products available. For specific manufacturer technical information or for an item not shown, please contact a Calvert Wire cabling specialist at 800-837-2668.