|
Transportation >> Automotive

 | Automotive Cables for Toyota

 
|  | Application: |  | Automotive Cables for DaimlerChrysler

 
|  | Application: |  | Type SGT Ground or Battery Cable

TYPE SGT (STARTER OR GROUND) CABLE - 50 Volt,
PVC Insulation, Stranded Conductor, 80°C or 105°C
Type SGT (starter or ground) cable is constructed with soft-annealed, flexible, stranded copper and insulated with high-quality thermoplastic. The SGT standard is for battery, starter and ground cable intended for use at 50 volts or less in surface vehicle electrical systems of automobiles, boats, buses, RVs, trailers and trucks.
Available in standard battery circuit colors of black and red
Meets Ford M1L-56A and Chrysler MS-3450 specifications
Maximum continuous conductor temperature: 80°C or 105°C
 
|  | Application: Starter or battery ground circuits in surface vehicle electrical systems |  | Type SXL Ground or Battery Cable

TYPE SGX (STARTER OR GROUND) CABLE - 50 Volt,
XLP Insulation, Stranded Conductor, 125°C
Type SGX (starter or ground) cable is constructed with soft-annealed, flexible, stranded copper and insulated with high-quality cross-linked polyethylene (XLP). The SGX standard is for battery, starter and ground cable intended for use at 50 volts or less in surface vehicle electrical systems of automobiles, boats, buses, RVs, trailers and trucks where resistance to abrasion, heat and aging is desirable per SAE J1127.
Resistant to abrasion, heat and aging
Meets Ford QVM standards
Conforms to SAE specification J1127
Maximum continuous conductor temperature: 125°C
 
|  | Application: Starter or battery ground circuits |  | Type GXL Primary Wire

TYPE GXL AUTOMOTIVE PRIMARY WIRE - 50 Volt,
XLP Insulation, Stranded Conductor, 125°C
Type GXL cable is constructed with soft-annealed, flexible, stranded copper and insulated with high-quality cross-linked polyethylene (XLP). The GXL standard is for use in engine compartments in surface vehicle electrical systems of automobiles, boats, buses, RVs and trucks where higher heat resistance is required according to SAE J1128.
Resistant to high heat
Available in solid colors and stripes
Meets Ford M1L-85B and Chrysler MS-8900)specifications
Conforms to SAE J1128
Maximum continuous conductor temperature: 125°C
 
|  | Application: Engine compartments of automobiles, boats, buses, RVs and trucks |  | Type TXL Extra-Thin Primary Wire

TYPE TXL AUTOMOTIVE PRIMARY WIRE - 50 Volt,
XLP Insulation, Stranded Conductor, 125°C
Type TXL cable is constructed with soft-annealed, flexible, stranded copper and insulated with high-quality cross-linked polyethylene (XLP). The TXL extra-thin cable is for use in automotive electrical applications where small diameter and minimal weight is desirable. The cable is designed for surface vehicle electrical systems of automobiles, boats, buses, RVs and trucks where higher heat resistance is required according to SAE J1128.
Resistant to high heat
Extra-thin construction
Available in solid colors and stripes
Meets Ford M1L-123A and Chrysler MS-8288
Conforms to SAE J1128
Maximum continuous conductor temperature: 125°C
 
|  | Application: Automotive applications where small diameter and minimal weight is desirable |  | Type GPT Primary Wire

TYPE GPT AUTOMOTIVE PRIMARY WIRE - 50 Volt,
PVC Insulation, Stranded Conductor, 85°C
Type GPT cable is constructed with soft-annealed, flexible, stranded copper and insulated with high-quality thermoplastic. The GPT cable is for use in automotive electrical applications where general circuit wiring is required. The cable is designed for surface vehicle electrical systems of automobiles, boats, buses, RVs and trucks where higher heat resistance is required according to SAE J1128.
Available in solid colors and stripes
Meets Ford Ml L-56A and Chrysler MS-3450 specifications
Conforms to SAE J1128
Maximum continuous conductor temperature: 85°C
 
|  | Application: Automotive general circuit wiring |  | Type TWP Extra-Thin Primary Wire

TYPE TWP EXTRA-THIN AUTOMOTIVE PRIMARY WIRE - 50 Volt,
PVC Insulation, Stranded Conductor, 85°C
Type TWP cable is constructed with soft-annealed, flexible, stranded copper and insulated with high-quality thermoplastic. The TWP extra-thin cable is for use in automotive electrical applications where general circuit wiring is required. The cable is designed for surface vehicle electrical systems of automobiles, boats, buses, RVs and trucks where higher heat resistance is required according to SAE J1128.
Extra-thin construction
Available in solid colors and stripes
Meets Ford MlL-120A and Chrysler MS-7889 specifications
Conforms to SAE J1128
Maximum continuous conductor temperature: 85°C
 
|  | Application: Automotive general circuit wiring |  | Type HDT Heavy-Duty Primary Wire

TYPE HDT HEAVY-DUTY AUTOMOTIVE PRIMARY WIRE - 50 Volt,
PVC Insulation, Stranded Conductor, 85°C
Type HDT Cable is constructed with soft-annealed, flexible, stranded copper and insulated with high-quality thermoplastic. The HDT Cable is for use in automotive electrical applications where greater physical protection is required. The cable is designed for surface vehicle electrical systems of automobiles, boats, buses, RVs and trucks where higher heat resistance is required according to SAE J1128.
Available in solid colors and stripes
Meets Ford M1L-50A and Chrysler MS-3494 specifications
Conforms to SAE J1128
Maximum continuous conductor temperature: 85°C
 
|  | Application: Automotive general circuit wiring |  | PVC Brake Cable

PVC BRAKE CABLE - 50 Volt,
PVC Insulation, Stranded Conductor, 85°C
PVC Brake Cable is constructed of parallel GPT primary conductors which consists of soft-annealed, flexible, stranded copper and insulated with high-quality thermoplastic. Parallel construction is common for use with trailers and vehicles where space is limited.
Constructed of parallel GPT primary conductors
Offers protection against moisture and abrasion
Maximum continuous conductor temperature: 85°C
 
|  | Application: Truck, automotive, trailer or marine applications |  |
|