Voice, Data & Video >> UTP/STP


 Category 6

CATEGORY 6 CABLE UTP - PO Insulation, PVC Jacket, 23 AWG Bare Copper  60°C

Category 6 Cable exhibits excellent transmission characteristics meeting Category 6 requirements. The cable is UL Listed Type CMR for installation in vertical riser and general horizontal applications when installed in accordance with the NEC Article 800. The cable is designed to work with 4 Mbps Token Ring (IEEE 802.5), 10 Mbps 10 Base-T Ethernet (IEEE 802.3), 16 Mbps Token Ring (IEEE 802.5), 100 Mbps (ANSI X3T9.5 TPDDI), 100 VG ANYLAN (IEEE 802.12), 100Mbps 100 BASE-T Fast ETHERNET (IEEE 802.3), 155 Mbps ATM, 622 Mbps ATM and 1000 Mbps 1000 BASE-T Gigabit ETHERNET (IEEE 802.3).

  • 4-pair unshielded twisted pair cable
  • 23 AWG stranded bare copper conductor
  • High-density polyethylene insulation, PVC jacket
  • UL Listed Type CMR/MPR
  • Meets or exceeds NEC Article 800, UL Subject 444, EIA/TIA 568A, Category 6 Draft 3, PCC FT4

  • PrintRequest

    Category 6
    Application: 10BASE-T, 100BASE-T4, and 100BASE-TX installations; Multimedia
     Category 6 - Plenum

    PLENUM CATEGORY 6 CABLE UTP - FEP Insulation, LSPVC Jacket, 23 AWG Bare Copper, 60°C

    Category 6 Cable exhibits excellent transmission characteristics meeting Category 6 requirements. The cable is UL Listed Type CMP for installation in ducts, plenums and other spaces used as environmental air returns when installed in accordance with the NEC Article 800. The cable is designed to work with 4 Mbps Token Ring (IEEE 802.5), 10 Mbps 10 Base-T Ethernet (IEEE 802.3), 16 Mbps Token Ring (IEEE 802.5), 100 Mbps (ANSI X3T9.5 TPDDI), 100 VG ANYLAN (IEEE 802.12), 100Mbps 100 BASE-T Fast ETHERNET (IEEE 802.3), 155 Mbps ATM, 622 Mbps ATM and 1000 Mbps 1000 BASE-T Gigabit ETHERNET (IEEE 802.3).

  • For installation within ducts, plenums & other spaces used for environmental air
  • 4-pair unshielded twisted pair cable
  • 23AWG stranded bare copper conductor
  • Low-smoke PVC jacket
  • UL Listed Type CMP/MPP
  • Meets or exceeds NEC Article 800, UL Subject 444, EIA/TIA 568A, Category 6 Draft 3, PCC FT4

  • PrintRequest

    Category 6 - Plenum
    Application: 10BASE-T, 100BASE-T4, and 100BASE-TX installations; Multimedia
     Category 5e

    ENHANCED CATEGORY 5 CABLE UTP - PO Insulation, PVC Jacket, 24 or 22 AWG Bare Copper, 60°C

    Category 5e Cable exhibits excellent transmission characteristics meeting Category 5e requirements up to 350 Mhz. The cable is UL Listed Type CMR for installation in vertical riser and general horizontal applications when installed in accordance with the NEC Article 800. The cable is designed to work with 4 Mbps Token Ring (IEEE 802.5), 10 Mbps 10 Base-T Ethernet (IEEE 802.3), 16 Mbps Token Ring (IEEE 802.5), 100 Mbps (ANSI X3T9.5 TPDDI), 100 VG ANYLAN (IEEE 802.12), 100Mbps 100 BASE-T Fast ETHERNET (IEEE 802.3), 155 Mbps ATM, 622 Mbps ATM and 1000 Mbps 1000 BASE-T Gigabit ETHERNET (IEEE 802.3).

  • 4-pair unshielded twisted pair cable
  • 24AWG stranded bare copper conductor
  • High-density polyethylene insulation, PVC jacket
  • UL Listed Type CMR/MPR
  • Meets or exceeds TIA/EIA-568-A, UL 444, ICEA S-80-576, UL 1666

  • PrintRequest

    Category 5e
    Application: 10BASE-T, 100BASE-T4, and 100BASE-TX installations
     Category 5e - Shielded

    ENHANCED CATEGORY 5 CABLE STP - PO Insulation, PVC Jacket, 24 AWG Bare Copper, 60°C

    Category 5e Cable exhibits excellent transmission characteristics meeting Category 5e requirements up to 350 Mhz. The cable is UL Listed Type CMR for installation in vertical riser and general horizontal applications when installed in accordance with the NEC Article 800. The cable is designed to work with 4 Mbps Token Ring (IEEE 802.5), 10 Mbps 10 Base-T Ethernet (IEEE 802.3), 16 Mbps Token Ring (IEEE 802.5), 100 Mbps (ANSI X3T9.5 TPDDI), 100 VG ANYLAN (IEEE 802.12), 100Mbps 100 BASE-T Fast ETHERNET (IEEE 802.3), 155 Mbps ATM, 622 Mbps ATM and 1000 Mbps 1000 BASE-T Gigabit ETHERNET (IEEE 802.3).

  • 4-pair unshielded twisted pair cable
  • Pairs are wrapped in a 100% aluminium mylar tape screen with drain wire
  • 24AWG stranded bare copper conductor
  • High-density polyethylene insulation, PVC jacket
  • UL Listed Type CMR/MPR for use in walls and conduit in ceiling
  • Meets or exceeds TIA/EIA-568-A, UL 444, ICEA S-80-576, UL 1666

  • PrintRequest

    Category 5e - Shielded
    Application: 10BASE-T, 100BASE-T4, and 100BASE-TX installations
     Category 5e - Plenum

    PLENUM ENHANCED CATEGORY 5 CABLE UTP - FEP Insulation, LSPVC Jacket, 24 or 22 AWG Bare Copper, 60°C

    Category 5e Cable exhibits excellent transmission characteristics meeting Category 5e requirements up to 350 Mhz. The cable is UL Listed Type CMP for installation in ducts, plenums and other spaces used as environmental air returns when installed in accordance with the NEC Article 800. The cable is designed to work with 4 Mbps Token Ring (IEEE 802.5), 10 Mbps 10 Base-T Ethernet (IEEE 802.3), 16 Mbps Token Ring (IEEE 802.5), 100 Mbps (ANSI X3T9.5 TPDDI), 100 VG ANYLAN (IEEE 802.12), 100Mbps 100 BASE-T Fast ETHERNET (IEEE 802.3), 155 Mbps ATM, 622 Mbps ATM and 1000 Mbps 1000 BASE-T Gigabit ETHERNET (IEEE 802.3).

  • For installation within ducts, plenums & other spaces used for environmental air
  • 4-pair unshielded twisted pair cable
  • 24AWG stranded bare copper conductor
  • Low-smoke PVC jacket
  • UL Listed Type CMP/MPP
  • Meets or exceeds TIA/EIA-568-A, UL 444, ICEA S-80-576, UL 1666

  • PrintRequest

    Category 5e - Plenum
    Application: 10BASE-T, 100BASE-T4, and 100BASE-TX installations
     Category 5e - Outside Plant

    OUTSIDE PLANT ENHANCED CATEGORY 5 CABLE - Direct Burial, PVC Insulation, PE Jacket, 24 AWG Solid Bare Copper, 75°C

    Outside Plant Category 5e Cable is an outdoor-rated TIA/EIA 568B.2 Category 5e cable that can be installed directly buried in the ground, inside a duct or aerially lashed to a support member. The cable is fully flooded and has a tough UV and abrasion-resistant black polyethylene jacket. The cable is designed to withstand temperatures as low as -70°C and as high as +75°C with data transmission rates up to 100 Mb/s. This cable is the ideal solution for connecting locations outside the main building (such as portable classrooms) without using expensive optical fiber solutions.

  • 4-pair unshielded twisted pair cable
  • 24AWG solid bare copper conductor
  • Gel filled and jacketed with black UV resistant polyethylene
  • Available in both unshielded (UTP) and shielded (ScTP)
  • Aluminum and steel armor available
  • Also suited for runs under concrete slab and in other wet locations
  • Meets or exceeds TIA/EIA 568-B.2 CAT 5e Horizontal Cable

  • PrintRequest

    Category 5e - Outside Plant
    Application: 10BASE-T, 100BASE-T4, and 100BASE-TX outside plant installations
     Category 3

    CATEGORY 3 CABLE - PVC Insulation, PVC Jacket, 24 or 22 AWG Bare Copper

    Category 3 Cable exhibits excellent transmission characteristics meeting Category 3 requirements up to 16 Mhz. The cable is UL Listed Type CMR for installation in vertical riser and general horizontal applications when installed in accordance with the NEC Article 800. The cable is designed to work with 4 Mbps Token Ring (IEEE 802.5), 10 Mbps 10 Base-T Ethernet (IEEE 802.3) and Residential and Office Phone/Fax/Internet Systems.

  • 2 to 300 pair cable available
  • Flame retardant PVC jacket
  • UL or ETL Listed Type CMR/MPR
  • Meets or exceeds: TIA/EIA-568-A, UL 444, ICEA S-80-576, UL 1666

  • PrintRequest

    Category 3
    Application: Token Ring; 10Mbps Ethernet; Voice
     Category 3 - Plenum

    PLENUM CATEGORY 3 CABLE - LSPVC Insulation, LSPVC Jacket, 24 or 22 AWG Bare Copper

    Category 3 Cable exhibits excellent transmission characteristics meeting Category 3 requirements up to 16 Mhz. The cable is UL Listed Type CMP for installation in ducts, plenums and other spaces used as environmental air returns when installed in accordance with the NEC Article 800. The cable is designed to work with 4 Mbps Token Ring (IEEE 802.5), 10 Mbps 10 Base-T Ethernet (IEEE 802.3) and Residential and Office Phone/Fax/Internet Systems.

  • For installation within ducts, plenums & other spaces used for environmental air
  • 2 to 300 pair cable available
  • Low-smoke PVC jacket
  • UL Listed Type CMP
  • Meets or exceeds: TIA/EIA-568-A, UL 444, ICEA S-80-576, UL 1666

  • PrintRequest

    Category 3 - Plenum
    Application: Token Ring; 10Mbps Ethernet; Voice
     T1 Cable

    T1 TELEPHONE EXCHANGE CABLE - STP, PE or FEP Insulation, PVC or Fluoropolymer Jacket, 2 or 4 Pair

    T1 cables have been specially designed for interconnection of T1 level transport equipment. Individual pair isolation allows for maximum protection from outside interference.

  • Individually Shielded Pairs
  • Riser or Plenum Rated
  • Available in constructions up to 4 pairs
  • Compact Size

  • PrintRequest

    T1 Cable
    Application: T1 interconnection applications
     High Pair Count Cable

    HIGH PAIR COUNT - Power Sum Backbone Cable

    High pair cables are used for backbone cabling for voice or data applications. These cables are ideally suited for backbone, cross-connect and pre-connectorized assemblies.

    Category 3
  • Data and voice backbone applications
  • Available in plenum and riser-rated versions
  • Supports 10 BASE-T, Token Ring and Voice Telephony applications

    Category 5e
  • Data and voice backbone applications
  • Available in plenum and riser-rated versions
  • Supports 10BASE-T, 100BASE-T, Token Ring, Voice, 155 Mb/s ATM

  • PrintRequest

    High Pair Count Cable
    Application: Backbone cabling for voice or data


    Specifications listed are from multiple manufacturers. The items above represent only a portion of the products available. For specific manufacturer technical information or for an item not shown, please contact a Calvert Wire cabling specialist at 800-837-2668.