Voice, Data & Video >> Telephone


 Silver Satin Flat Modular Cord

SILVER SATIN FLAT LINE CORD - Thermoplastic Insulation, PVC Jacket, Shielded or Unshielded, Stranded Conductor

Silver Satin Flat Line Cord is ideal for cost-saving voice and data applications not requiring high data rates. The cord is primarily used for indoor telephone systems running from phone to jack.

  • Color-coded insulated conductors
  • One to eight conductors available
  • Shielded or Unshielded

  • PrintRequest

    Silver Satin Flat Modular Cord
    Application: Inside telecommunications interconnect cable
     Cross Connect Wire

    TELEPHONE CROSS CONNECT WIRE - SR-PVC Insulation, Multi-pair, Solid Conductor

    Cross Connect Wire connects two subsystems of a telecommunications circuit. The cross connect or jumper wire, will connect the user field to the extension field of the common equipment. The cable consist of solid bare copper and flame retardant semi-rigid polyvinyl chloride (SR-PVC) insulation. The cable is used for pre-wiring residences during construction in anticipation of future multi-telephone-set installation or cross connecting between terminals.

  • Color-coded pairs
  • One to four pairs available
  • UL listed

  • PrintRequest

    Cross Connect Wire
    Application: Cross connecting between terminals
     Outside Plant Telephone Cable PE-89

    OUTSIDE PLANT TELEPHONE CABLE - REA Spec. PE-89 Direct Burial, Foamed PO Insulation, PE Jacket

    This Outside Plant Telephone Cable meets the REA Specification PE-89 for telephone cable. Used for distribution and long distance networks, the cable is approved for direct burial, duct or aerial installations when supported by a messenger. In addition, the telephone cable can be used in wet environments where protection from moisture is required.

  • Designed for use as a duct, aerial, or direct burial cable
  • Available up to 3600 pair
  • Sunlight-resistant, linear low-density polyethylene jacket
  • Individual conductors twisted into pairs with varying lays to minimize crosstalk
  • Specified color combinations to provide pair identification

  • PrintRequest

    Outside Plant Telephone Cable PE-89
    Application: Trunk & exchange area service
     Station Wire

    TELEPHONE STATION WIRE - 300 Volt, PVC Insulation and Jacket, Unshielded, Multi-Conductor

    Telephone Station Wire is thermoplastic insulated, general-purpose communication wire for single line telephone station. The cable is designed for in-wall installations, single line telephone systems, and intercoms.

  • Indoor/outdoor use
  • Sunlight resistant PVC jacket Color Code: 1-Red, 2-Green, 3-Yellow, 4-Black
  • UL type CMX-Outdoor - CMR rated

  • PrintRequest

    Station Wire
    Application: Inside/outside use in station installations
     Outside Plant Telephone Cable PE-39

    OUTSIDE PLANT TELEPHONE CABLE - REA Spec. PE-39 Direct Burial, Solid PO Insulation, PE Jacket

    This Outside Plant Telephone Cable meets the REA Specification PE-39 for filled telephone cable. Used for distribution and long distance networks, the cable is approved for direct burial, duct or aerial installations when supported by a messenger. In addition, the telephone cable can be used in wet environments where protection from moisture is required.

  • Designed for use as a duct, aerial, or direct burial cable
  • Available up to 3600 pair
  • Sunlight-resistant, linear low-density polyethylene jacket
  • Individual conductors twisted into pairs with varying lays to minimize crosstalk
  • Specified color combinations to provide pair identification

  • PrintRequest

    Outside Plant Telephone Cable PE-39
    Application: Trunk & exchange area service
     DRPP Aerial Drop Wire

    DRPP AERIAL DROP WIRE - PVC Insulation and Jacket, Copper-Clad Steel Conductor

    DRPP Aerial Drop Wire is used to take telecommunication services from the utility pole to the house. The cable is self-supporting.

  • Outdoor rated
  • Self-supporting

  • PrintRequest

    DRPP Aerial Drop Wire
    Application: Takes telecommunication services from the utility pole to the house
     Telephone Distribution Cable

    TELEPHONE DISTRIBUTION CABLE - PVC Insulation, PVC Jacket, Riser, Indoor, 60°C

    Telephone Distribution Cable is designed for vertical riser and general horizontal applications. The cable carries voice and carrier transmission between the station protector frames and other equipment terminals.

  • Flame retardant polyvinyl chloride (PVC) jacket
  • Color-coded insulated conductors
  • 1 to 400 pairs available
  • NEC 800 Type MPR/CMR
  • UL Standard 444 UL13
  • CSA C.22.2 No. 214.94 PCC-FT4

  • PrintRequest

    Telephone Distribution Cable
    Application: Vertical riser and general horizontal applications


    Specifications listed are from multiple manufacturers. The items above represent only a portion of the products available. For specific manufacturer technical information or for an item not shown, please contact a Calvert Wire cabling specialist at 800-837-2668.